The HSM VK 3012 is a channel baling press designed for industrial applications with small material loads. With a throughput of up to approximately 228 m³/h, this fully-automatic press is suitable for compression of paper, cardboard, and plastic film. It features a large loading aperture of 1140 mm length, allowing for optimized feeding methods. The HSM VK 3012, from POWER Bear, is designed for integration into automated industrial production processes, making it one of the most efficient waste management equipment in our range of products.
The HSM VK 3012 is particularly suitable for compression of paper, cardboard, and plastic film, and can bale up to approximately 50 kg/m³ bulk weight. It is designed for continuous loading with conveyor belts, air feeding, or similar systems, ensuring efficient operation. Controlled by a light barrier, the pressing process is automatic, allowing for easy operation. The operating side of the press can be fully integrated into existing workflows and processes and can be selected based on convenience. The HSM VK 3012 is one of the most efficient recycling machinery for smaller loads, and we can provide a suitable solution for other materials or applications upon your request. It is available with driving powers of 15 kW as well as 22 kW.
| Pressing Power | 310 kN |
| Specific Pressing Power | 55.4 N/cm² |
| Driving Power | 15 kW, 22 kW |
| Voltage / Frequency | 400 V / 50 Hz (also available in KSA specs 380 V / 60 Hz upon request) |
| Cycle Time When Idling (Theoretical) | 13.9 s – 15 kW, 10.1 s – 22 kW |
| Loading Aperture Dimensions (Width x Length) | 620 mm x 1140 mm |
| Bale Dimensions (Width x Height x Length) | 700 mm x 800 mm x 600-1200 mm |
| Volume Throughput in Idle Operation (Theoretical) | 166 m³/h – 15kW , 228 m³/h – 22 kW |
| Volume Throughput at 50kg/m³ (Theoretical) | up to approx. 8.3 t/h – 15 kW kW, up to approx. 11.4 t / h – 22 kW |
| Bale Weight | 190-350 kg approx. |
| Dimensions (Length x Width x Height) | 7378 mm x 2951 mm x 2465 mm |
| Machine Weight | 6.3 t |
What is the warranty on the baler machines? All of our products are covered with a 1-year warranty against manufacturing defects.
Are the operations of the baler user-friendly? Yes, HSM balers are safe & designed to be operated with minimal effort. They are easy to use and have very high safety standards. We provide user orientation and operator training at the time of machine installation.
What materials can be baled using HSM VK 3012 balers? Cardboard, plastic film, mixed paper, etc.
The POWER Bear team will advice you about the most practical delivery option to your address.
Contact us for project-specific requirements
This skip is welded from the inside and outside and has a bottom plate of 6 mm and a side wall plate of 4 mm. This skip is unique because of the top frame beams and cold rolled profile
