The Duo Shredder 5750 has two-stage, fully automatic file disposal system. Depending on the type of material, a practical throughput of up to 800 kg / h can be achieved. In combination with an HSM baling press , the HSM Duo Shredder 5750 becomes a complete disposal system. Feeding of the material via conveyor belt or discharge chute.
The 5750 has Dual Shredding system. 1st stage pre-shredding as a four-shaft system, consisting of two intake shafts and two cutting shafts. 2nd stage post-shredding as a two-shaft system. Maximum speed is obtained through optimal coordination of the cutting units, gentle motor start-up and overload protection through frequency converters. Stable filling chute with integrated overfill protection controls the shredder and the conveyor belt.
| Type of cut: | Particle cut |
| Cutting width: | 6 mm |
| Particle length: | 40-53 mm |
| Security level (DIN 66399 / ISO / IEC 21964): | E-3 | O-2 | P-3 | T-3 |
| Color | Light Grey |
| Clippings: | Paper, staples and paper clips, credit cards, files, USB sticks |
| Input Width | 500 mm |
| Voltage frequency: | 400 V / 50 Hz |
| Bale Weight: | 40 to 90 Kg |
| Paper throughput: | 800 kg / h |
Shredder system with two shredding stages.
1st stage pre-shredding as a four-shaft system, consisting of two intake shafts and two cutting shafts.
2nd stage post-shredding as a two-shaft system.
Overall system control designed for automatic operation.
Modern PLC control for integrated control of all system components.
Infeed conveyor belt for Duo Shredder.
Stable frame construction with integrated and electrically protected inspection and maintenance doors.
Where the Shredders are used frequently?Archives, Offices & Department dealing with confidential information’s, Financial Institutions.
What is the Security Level for the Shredder?Security level (DIN 66399 / ISO / IEC 21964): E-3 | F-1 | O-3 | P-4 | T-4
The POWER Bear team will advice you about the most practical delivery option to your address.
Can deliver up to 4 pcs
can deliver up to 9 pcs
Contact us for EXPORT FRIENDLY SKIP design.
This skip is welded from the inside and outside and has a bottom plate of 6 mm and a side wall plate of 4 mm. This skip is unique because of the top frame beams and cold rolled profile
