Recyclers favorite baler due to its high density bale output, low-noise and energy-saving technology, the HSM V-Press 860 is the most economical solution for your recyclables compacting. Suitable for cardboard as well as film. V Press 860 balers are capable of processing high volumes of recyclables into extremely dense, mill size bales, up to 480kg. Due to uniformity in bale density, bales are efficient to transport.
V Press 860’s rapid stroke technology saves time and money. The V press 860 is equipped with hand wheel door lock which make it easy to handle opening and closing of the doors. It has quick and easy installation due to crossed cylinders. Special feature of Auto start of the pressing process after closing the door. There is convenient membrane keypad with text display, which shows the current status of the machine. It is equipped with HSM TCS (Torsion Control System) for monitoring press ram movement. Suitable for cardboard as well as film.
| Pressing power | 594 kN |
| Specific pressing power | 63,46 N/cm² |
| Driving power | 4 kW |
| Voltage / Frequency | 400 V / 50 Hz |
| Cycle time when idling | 25 s |
| Loading aperture width x height | 1195 x 650 mm |
| Bale length from to x Bale width x Bale height | 1200 x 780 x 1200 mm |
| Loading Height | 1110 mm |
| Hourly Output in Balers | 1-2 bales Approx. |
| Bale weight | 480 Kg Approx. |
| Machine Width x Depth x Height | 1797 x 1247 x 2985 mm |
| Machine Weight | 2083 Kgs |
| Method of strapping | Vertical |
| Number of strappings | 4 |
Easy to handle thanks to counter-rotating thread for quick opening and closing.
(Torsion Control System) for monitoring press ram movement
Automatic start of the pressing process after closing the door
Convenient membrane keypad with text display, which shows the current status of the machine.
Suitable for cardboard as well as film
Rapid stroke technology saves time and money.
What is the maximum bale weight for V Press 860?The maximum bale weight is 480 kgs per bale.
Can we use strapping tape instead of wire for HSM v press 860?Yes, strapping tape can be used, we have option to add strapping station can be offered at an additional cost.
What are the different model available in HSM v press 860?V Press 860 has 3 different versions, 860 Eco, 860 Plus & 860 Max. Customer can chose suiting the right baler as per their needs.
The POWER Bear team will advice you about the most practical delivery option to your address.
Can deliver up to 4 pcs
can deliver up to 9 pcs
Contact us for project specific design
This skip is welded from the inside and outside and has a bottom plate of 6 mm and a side wall plate of 4 mm. This skip is unique because of the top frame beams and cold rolled profile
